S-600 Series


 

Overview

Simplicity, Reliability, Durability and Value. . .

four good reasons for owning one of the Clausing/Kondia SHARK S-600 series CNC Machining Centers. The GE Fanuc 0MC control, the industry’s most reliable control, is simple to learn and easy to operate. Our Automatic Tool Changer, with a bi-directional turret and electric positioning, provides trouble-free, reliable service. Our extra heavy-duty construction with hardened and ground square slideways and Turcite coated adjoining surfaces provide smooth operation and accurate machining year after year. Combine Simplicity, 

Reliability and Durability and you have value that can't be beat.

Automatic Tool Changer:

 The Automatic Tool Changer is designed for easy operation and reliability. The 22 position ATC turret system is bi-directional for the shortest tool change path and features electric positioning for trouble-free performance.

Three Rugged Models:

S-600 4000 rpm
S-600XT 6000 rpm
S-600XXT 10000 rpm

 
 
Features
The SHARK S-600 Machining Center comes equipped with features that cost extra on comparably priced machining centers.
     
  • Rigid Tapping 
  • Main Spindle Cooling System on Models with Spindle Speeds of 6,000 rpm and above
  • 71/2/10 Hp Fanuc AC Spindle Drive Motor
  • X & Y axis motors mounted direct to ballscrews by couplings 
  • Mechanical counterbalance inside column to offset headstock weight
  • Extra heavy-duty cartridge-type precision spindle for superior rigidity
  • ABEC class 7 spindle bearings
  • 22 position reliable electric positioning Automatic Tool changer
  • Bi-directional tool turret for fast tool changes
  • Manual control override on ATC
  • GE FANUC 0MC easy to learn, easy to operate 3 axis CNC control
  • Large hardened and ground square slideways for a greater load bearing surface 
  • All adjoining surfaces to slideways are Turcite coated and hand scraped to ensure maximum performance
  • All slideways and ball screws are protected from chips and coolant by telescoping covers
  • Enclosed work area during machining operation
  • Three windows allow the machine operator to view work area from all sides
  • Multi-directional coolant nozzles and coolant tank

 

Specification

Table Dimensions

Work Area (X,Y) 27.55" x 13.78"
Number of T-Slots 3
Width of T-Slots .71"
Distance between centers of T-Slots 4.33"
Height from Table Surface to Floor 33.46
Work Travels
X Axis 23.62"
Y Axis 15.75"
Z Axis 20"
Ballscrews (X,Y,Z) 1.26" Dia.
Maximum Table Load 675 lbs.
Feed Rate
Table Rapid Traverse Rate (X & Y) 950 ni/min
Vertical Head Rapid Traverse Rate (Z) 787 in/min
Work Feed 197 in/min
Headstock
Spindle Taper BT-40
Spindle Speed Range (Model S600) 4000 rpm
Spindle Speed Range (Model S600XT) 6000 rpm
Spindle Speed Range (Model S600XXT) 10000 rpm
Max. Torque @ 750 rpm (S-600 series) 72 ft/lbs
Spindle Motor AC 71/2/10 Hp
Spindle to Table Diatance 24.73" max. 7.72" min.
Spindle Center to Column 15.78"
Programmed Increments .7 sec.
Main Spindle Cooling System 6000 rpm and above
Automatic Tool Changer
Number of Tools 22
Selection System Sequential or Bi-directional
Maximum Diameter (adjacent tools) 3.35"
Maximum Diameter (non-adjacent tools) 5.31"
Maximum Tool Length 9.84"
Maximum Tool Weight 13.23 lbs
Tool Change Time 6 sec.
Motors and Drives
Main Spindle Motor AC 71/2/10 Hp
X and Z Axis Motors AC 1.1 Hp (54.9 in/lbs)
Y Axis Motor AC 1.1 Hp (54.9 in/lbs)
Main Spindle Coolant System 1.04 Hp
Coolant Pump 1 Hp
Maximum Power Total 15.6 Hp
General
Floor Space Requirements 76.38" x 76.77"
Maximum Height 88.19"
Maximum Weight 6836 lbs.
Machine Accuracy
Positioning Accuracy (+/-) 0.0004
Repeatability (+/-) 0.0002
Resolution 0.00004

Dimensions



The powerful GE Fanuc AC spindle drive motor has exceptional low-end torque and a large operating range at full horsepower.
 
 
 

  S-600 Series Spindle Power Chart

 
 

FOR MORE INFORMATION:

Phone:  248-442-0440
Fax:      248-442-0807
e-mail:superior@sudetco.com
 
 

RETURN TO HOME PAGE