 |
|
|
 |
|
| Punch Station Accessories | |
| Ask
about our New Style Press Production Gauging Table --
heavy duty table and adjustable roller stops -- allows ease of material handling and multiple hole production. |
|
 |
|
|
Press Production
Table
16"x36' std. Other sizes available. (Gauging Table avail. - not shown) |
Structural Die
Block-
Punch flanges and webon channel 3" thru 8" wide 1 1/4" O.D. Die.. |
Standard 4-Way
Brake Set forms bends/lengths from 18" to 48" std |
Special Brake Die
Holder with 9/16" slot in upper & lower to accommodate Press Brake Tooling |
Pipe Notcher -
sizes up to 3 1/2" O.D./pipe and round & square tubing |
 |
||||
| Pipe
Shear - shear
andpinch pipe or tubing up to 2 1/2" O.D. |
Channel
Shear
cuts 2" to 8" std. channel/mild steel |
Mitring
Angle Shear
shears angle to 6"x6"x1/2" miters 5"x5"x1/2" to 45º |
Rod Shear | Spear
Point
(Picket) Tooling |
 |
||||
| Adjustable
Work-
Support Rollers fit on each end of press table |
Over-sized
28XX & Special Punches and Dies
up to 6" dia. and larger |
Portable
Work Lamp
24" gooseneck lamp with magnetic base |
Casters are available for most models. Special tooling is available on request. | |
| Some accessories fit models above 40-ton only. | ||||
| Shear Station Accessories | ||||
 |
||||
| Hy-Performance
Blade Increases flat bar shearing capacity |
Coper-Notcher
Production Plate material support table with squaring arm 18"x18" |
Flat
Bar Production
Plate material support table w/squaring arm 12"x24" |
||
|
|
|
Phone: 248-442-0440
Fax: 248-442-0807
e-mail:superior@sudetco.com