Model BS300HAS

13" Automatic Band Saws

Features

Specifications

Dimensions

Cutting Capacity

Accessories

Construction Features & Options
Features: 
    Precise cut off length setting
    Auto head-elevation and quick approach control 

    Piece counter with auto shutoff 

    Multiple stroke counter for long pieces, 9 strokes standard 

    Power-driven blade cleaning brush and coolant cleaning flush hose 

    Idle wheel motion detector 

    Carbide and roller blade guides 

    Shuttle vise back-jaw feed method (no need for front stop) 

    Unique two-way vise jaw. 

    Safety and thermal overload switches 

    Guarded blades and wheel covers 

    Low voltage controls 

    Blade breakage sensor/motion detector provides automatic shutoff 

    Two year limited warranty
Return to top
Specifications:
Model
BS300HAS
Drive Motor
5 Hp, 230/460v 3 ph 


          (other voltages optional)
Hydraulic Motor
1 Hp
Hydraulic oil capacity
8 gal.
Bandwheel Dia.
16 1/2"
Blade Speeds 
108-430 fpm Inf. variable speed
Blade
1 1/4" x .042" x 12'-6 1/2"
Coolant
Recirculating
Coolant Capacity
15 gal.
90° Cutting Capacity
Round
13"
Rectangular
13" x 10"
*Bundle Cutting
10" x 6 1/2"
Height (head-up) (A)
75"
Base Width (B)
55"
Width (C)
74"
Height (head-down) (D)
51"
Bed Height (E)
23"
Base Depth (F)
29"
Base & Feed Table Depth (G)
64"
Depth (H)
77"
Net Weight
3100 lbs.
Shipping Weight
3600 lbs.
* When equipped with optional hydraulic bundle cutting attachment
Return to top
Dimensions:
Return to top
Cutting Capacities:
 
Capacity at 90° (inches) 

Return to top
Accessories:
BS021
Chip conveyor
BS082
Bundle Clamp
BS031
Variable vise pressure system
 
Return to top
Construction Features & Options:
Precise Cut-Off Length Setting

Easy selection of precise bar length. The digital readout is calibrated in .01 inch increments and can be repositioned with out interrupting the cutting cycle.
Hydraulic Blade Tension Control

During operation the correct tension is automatically maintained. The tension is reduced when the saw is shut-off. This procedure greatly increase blade service life.
Optional Bundle Fixture

The hydraulic-operated bundle fixture is designed for high-production multiple sawing of stacked bars, small rounds and tubing.
Optional Automatic Chip Conveyor

A power driven brush keeps the saw teeth free of chips. Rotating screw shaft in the coolant return drains chips of cutting fluid and propels dry chips by auger conveyor out through a discharge chute.
 
Quick-Action Hydraulic Twin Vise

Two hydraulic operated vises one is a fixed front vise, the other is an indexable traveling vise.
 
 

 
Cutting Piece Counter and Multiple Stroke Counter
The cutting piece counter is used to preset the number of cuts required on automatic operation. When the counter reaches the preset number the saw automatically stops.
Return to top

FOR MORE INFORMATION:

Phone:  248-442-0440
Fax:      248-442-0807
e-mail:superior@sudetco.com
 

RETURN TO HOME PAGE