2-axis CNC Vertical Mill
w/AUTOCON DynaPath® Delta Control


4VSQCNC Shown
 

Overview:

The affordable 2 axis CNC Vertical Mill with features found on higher priced Machines...

Manual Operation with DRO • Semi-Automatic Operation • X and Y Axis CNC Operation

Features:

  • Meehanite Castings for superior rigidity
  • Infinitely Variable Spindle Speeds (60-4300 rpm)
  • Hardened & Ground Ways
  • Column & Knee Way Covers
  • Ground T-slots to provide reference edge for positioning workpiece
  • Hardened & Ground Table Surface
  • Hardened & Ground Spindle
  • Chromed & Ground Quill
  • Ground Ball Screws & Chromed Motor Shaft
  • ABEC 7/CP4 Spindle Bearings
  • Coolant System w/Pump & Switch
  • Chromed Cross Feed Screw Covers and One-piece Wiper
  • Flexible Segmented Coolant Nozzle
  • Articulating Head for Compound Angles
  • Worm gear angular positioning of head in two directions
  • Handwheel fine quill feed
  • Lever-operated manual rapid quill movement
  • Adjustable automatic feed disengagement for quill feed in both directions
  • Reversing switch for clockwise or counter clockwise operation
  • Spindle Brake (Hand operated)
  • One-shot lubrication
  • Mini Electrical Box for Coolant and Mains
  • Tool Kit, Test and Accuracy Chart
  • Operations Manual/Parts List

Optional Accessories:

  • Chip Tray
  • Full Electrics*
  • Slotting Attachment
  • Air PWR Drawbar #8 & #30*
  • Air PWR Drawbar #40*
  • Electric Drawbar* 
  • 52 Piece Clamping Kit
  • Milling Chuck kit W/7 Collets
  • Horizontal Milling Attachment
  • AC Rapid Vertical Drive (4VSQ)*
  • 4" Riser Block (2VS)
  • 6" Riser Block (2VS)
  • 8" Riser Block (All Models)
* Factory Installed only

Machine Specifications:

Specification
2VSCNC
3VSCNC
4VSQCNC
Table Size
9" x 49"
10" x 54"
10" x 54"
No. of T-Slots
3
3
3
T-Slot Width
5/8"
5/8"
5/8"
T-Slot Center Distance
2.48"
2.48"
2.48"
Table Ways
Dovetail
Dovetail
Dovetail
Knee Ways
Dovetail
Square
Square
Column Ways
Dovetail
Dovetail
Square
Travels
X Longitudinal
30"
33"
33"
Y Cross
12"
16"
16.5"
Knee
16"
17.7"
17.7"
Ram
12.2"
20.5"
26.75"
Motors & Spindle
Motor Hp. Variable
3
3
5
Variable Spindle Speed rpm
Low Range
60-500
60-500
60-500
High Range
550-4300
550-4300
550-4300
Main Spindle Taper
R-8 or ISO 30
R-8 or ISO 30
ISO 40
Spindle Travel
5"
5"
5"
Quill Feed/Spindle Rev.
.0015/.003/.006
.0015/.003/.006
.0015/.003/.006
Quill Diameter
3-3/8"
3-3/8"
4-1/8"
Construction
Column Turret Diameter
14.9"
16.33"
16.33"
Knee Width
11.8"
14.17"
14.75"
Column Bearing Length
16.9"
18.1"
19.7"
Saddle/Table Bearing Length
19.8"
20.5"
20.5"
Ram/Turret Bearing Length
15-3/4"
17-3/8"
17-3/8"
Ram Length
24-1/2"
32-3/4"
38-5/8"
Table Load
700 lbs.
880 lbs.
990 lbs.
Net Weight
2090 lbs.
2970 lbs.
3630 lbs.

Control:
DynaPath® Delta
Two axis CNC Control with three axis DRO Mode
Operator Features
     
  • Manual Mode with Handwheel Operation & 3 Axis DRO
  • Push button MDI operation
  • Full 2 Axis Programmable for more Automatic Operation
  • 9-inch High-Resolution (640 x 480) Monochrome VGA CRT for Information Display
  • Display of Part and Machine Coordinates
  • Active Event and Subsequent Events Display
  • Spindle Speed Display and Actual Feedrate Display
  • Z-axis Quill Scale for DRO Feedback
  • Part Program Storage and Display, 64,000 Characters (545ft/165M)
  • Concurrent Operation Allows Part Programs to be Entered or Edited While Cutting a Part
  • Full-Travel Alphanumeric Keyboard
Part Programming Aids
  • Programming Format Switchable Between DynaPath® Menu-Driven Conversational and Conventional EIA/IS0 G-Codes. Parameter Initialized G-Codes for Part Programming Compatibility between Machines
  • Decimal Point Programming and Inch/Metric Input
  • Cartesian/Polar Coordinate Programming
  • Part Rotation: 0.001° to 359.999°
  • Scale Factor: 0.0001° to 99.9999° 
  • Absolute/Incremental Programming for Dimensions, Scale Factor and Part Rotation 

    • High-Resolution Interpolated Graphics Display to Verify Part Profile and Analyze Cutting Time B fore Machining the Part

FOR MORE INFORMATION:

Phone:  248-442-0440
Fax:      248-442-0807
e-mail:superior@sudetco.com
 

RETURN TO HOME PAGE