2-axis CNC Vertical Mill w/ACU-RITE® MILLPWR® Control


  2VSCNC Shown
 
 

Overview:

The affordable 2 axis CNC Vertical Mill with features found on higher priced Machines...

Manual Operation with DRO • Semi-Automatic Operation • X and Y Axis CNC Operation

Features:

  • Meehanite Castings for superior rigidity
  • Infinitely Variable Spindle Speeds (60-4300 rpm)
  • Hardened & Ground Ways
  • Column & Knee Way Covers
  • Ground T-slots to provide reference edge for positioning workpiece
  • Hardened & Ground Table Surface
  • Hardened & Ground Spindle
  • Chromed & Ground Quill
  • Ground Ball Screws & Chromed Motor Shaft
  • ABEC 7/CP4 Spindle Bearings
  • Coolant System w/Pump & Switch
  • Chromed Cross Feed Screw Covers and One-piece Wiper
  • Flexible Segmented Coolant Nozzle
  • Articulating Head for Compound Angles
  • Worm gear angular positioning of head in two directions
  • Handwheel fine quill feed
  • Lever-operated manual rapid quill movement
  • Adjustable automatic feed disengagement for quill feed in both directions
  • Reversing switch for clockwise or counter clockwise operation
  • Spindle Brake (Hand operated)
  • One-shot lubrication
  • Mini Electrical Box for Coolant and Mains
  • Tool Kit, Test and Accuracy Chart
  • Operations Manual/Parts List

Optional Accessories:

  • Chip Tray
  • Full Electrics*
  • Slotting Attachment
  • Air PWR Drawbar #8 & #30*
  • Air PWR Drawbar #40*
  • Electric Drawbar* 
  • 52 Piece Clamping Kit
  • Milling Chuck kit W/7 Collets
  • Horizontal Milling Attachment
  • AC Rapid Vertical Drive (4VSQ)*
  • 4" Riser Block (2VS)
  • 6" Riser Block (2VS)
  • 8" Riser Block (All Models)
* Factory Installed only

Machine Specifications:

Specification
2VSCNC
3VSCNC
4VSQCNC
Table Size
9" x 49"
10" x 54"
10" x 54"
No. of T-Slots
3
3
3
T-Slot Width
5/8"
5/8"
5/8"
T-Slot Center Distance
2.48"
2.48"
2.48"
Table Ways
Dovetail
Dovetail
Dovetail
Knee Ways
Dovetail
Square
Square
Column Ways
Dovetail
Dovetail
Square
Travels
X Longitudinal
30"
33"
33"
Y Cross
12"
16"
16.5"
Knee
16"
17.7"
17.7"
Ram
12.2"
20.5"
26.75"
Motors & Spindle
Motor Hp. Variable
3
3
5
Variable Spindle Speed rpm
Low Range
60-500
60-500
60-500
High Range
550-4300
550-4300
550-4300
Main Spindle Taper
R-8 or ISO 30
R-8 or ISO 30
ISO 40
Spindle Travel
5"
5"
5"
Quill Feed/Spindle Rev.
.0015/.003/.006
.0015/.003/.006
.0015/.003/.006
Quill Diameter
3-3/8"
3-3/8"
4-1/8"
Construction
Column Turret Diameter
14.9"
16.33"
16.33"
Knee Width
11.8"
14.17"
14.75"
Column Bearing Length
16.9"
18.1"
19.7"
Saddle/Table Bearing Length
19.8"
20.5"
20.5"
Ram/Turret Bearing Length
15-3/4"
17-3/8"
17-3/8"
Ram Length
24-1/2"
32-3/4"
38-5/8"
Table Load
700 lbs.
880 lbs.
990 lbs.
Net Weight
2090 lbs.
2970 lbs.
3630 lbs.

Control:

Two axis CNC Control with three axis DRO Mode
Hardware Features
     
  • Precision ground ball screws 
  • Powerful DC servo motors with 19 in/lbs of torque for stronger heavier cuts 
  • Closed loop feedback using ACU-RITE precision linear glass scales with .0001 resolution for true positioning accuracy and repeatability 
  • 486 microprocessor utilizing PC technology for flexibility and power 
  • RS-232 port for downloading from an offline source 
  • Large hard disk drive for on board storage 
  • Floppy disk drive • Modular construction 
  • Maximum table feedrate of 100 IPM 
Software Features and Benefits
     
  • Menu prompted conversational format is easy-to-learn and understand 
  • Hard key milling functions allows for quick and easy programming
  • Immediate part graphics provides immediate verification of part programs with zooming capabilities for intricate details 
  • Explode functionality allows the operator to examine programming steps such as bolt holes, repeats, rotations and mirror images in more detail
  • Remote stop and go switch reduces keypad interface by utilizing a hand held switch
  • Feed rate override keys provide the operator with the ability to increase or decrease the programmed feedrates
  • Absolute/incremental dimensioning allows dimensions to be input directly from the blueprint
  • Jog control provides the ability to move quickly from one location to another
and many more...

FOR MORE INFORMATION:

Phone:  248-442-0440
Fax:      248-442-0807
e-mail:superior@sudetco.com
 

RETURN TO HOME PAGE