3-Axis CNC Bed Mill

with Real Cutting Power

Overview:

 5 Hp Motor with 2 Infinitely Variable Speed Ranges 

Hardened & Ground Box Ways on Z Axis

Hardened & Ground Table Surface with Ground T-Slot

All Way Surfaces are Hardened and Ground with Square Ways on "Y" Axis and Dovetail Ways on "X" Axis
 
 

DynaPath®
Delta 40M 3-Axis CNC Control

Features:

The ATLAS CNC Bed Mills are equipped with an unbeatable list of standard features...
     
  • Counter balanced head assembly
  • Hardened and ground spindle
  • Hardened and ground quill
  • X, Y, & Z axes equipped with 7C, double nut ballscrews
  • ABEC 7/CP4 spindle bearings
  • 5/8" Imperial standard drawbar
  • Chip tray
  • Halogen work light
  • Dual electrical cabinet for CNC control and magnetics panel 
  • Automatic lubrication system
  • Coolant system with pump and switch
  • Flexible segmented coolant nozzle
  • Meehanite castings
  • Tool kit, test and accuracy chart
  • Operations manual/parts list

Control Features:

DynaPath® Delta 40M     3-Axis CNC Control

  • 14" Monochrome Monitor
  • 32 Bit 486SLC2-66MHZ processor
  • 387SX C0-processor
  • Up to 448K characters of battery backed SRAM storage for parts programs
  • Flash memory for machine control parameters
  • Non-volatile flash memory for operating system
  • Dual RS-232 Serial ports (300-38,400 Baud)
  • Interface for IBM compatible floppy disc drive for load/store of part programs, tool tables etc.
  • Servo update time 5 ms
  • Part program storage and display 64m (54-5 ft./165m)
  • Concurrent programming
  • Catalog mode (250 part programs)
  • Macro programming mode, 4 levels
  • Calc-assist
  • 4 view graphic
  • Terminal mode
Block processing time 5 ms

Specification:

Specifications
4BVS
6BVS
Table Size
10" x 54"
12" x 60"
Table Load Capacity
3740 lbs.
5720 lbs.
Number of T-Slots
3
3
T-Slot Width
.625"
.625"
T-Slot Center Distance
2.5"
2.5"
Table Way (X-Axis)
Dovetail
Dovetail
Bed Ways (Y-Axis)
Square
Square
Column Ways (Z-Axis)
Square
Square
Travels
Longitudinal (X-Axis)
27.15"
41.3"
Cross (Y-Axis)
14.9"
21.6"
Vertical (Z-Axis)
15.3"
20.4"
Quill
4.92"
4.92"
Head Tilt (left or right)
90°
90°
Rapid Traverse Rate X & Y
 196.8 (in/min)
196.8 (in/min)
Programmable Feedrate
 0-118 (in/min)
0-118 (in/min)
Feedrate Override
 0-120%
0-120%
Spindle Speed Override
 50-150%
50-150%
Spindle
Motor
5 Hp
5 Hp
No. of Infinitely Variable Speed Ranges
2
2
Low Gear Range
6-500
6-500
High Gear Range
500-4300
500-4300
Spindle Taper
ISO 40
ISO 40
Quill Feed in/revolution
.0015/.003/.006
.0015/.003/.006
Quill Dia.
4.13"
4.13"
Construction
Height
90"
99"
Working  Width
71.5"
93"
Working Depth
59"
70"
Column Way Bearing Length
15.7"
18.1"
Width Across Column Ways
11.7"
11.7"
Length of Saddle on Bed
11.2"
14.2"
Width Across Bed Ways
16.5"
22.8"
Length of Saddle Under Table
26"
53.1"
Center of Spindle to Column Ways
18.3"
19.88"
Table to Column Ways (max.)
19.88"
27.08"
Table to Column Ways (min.)
4.13"
5.43"

 

FOR MORE INFORMATION:

Phone:  248-442-0440
Fax:      248-442-0807
e-mail: www.superior@sudetco.com
 
 

RETURN TO HOME PAGE