15" Floor Drill, 15-1/2" x 21-1/2" Oil Table

Features:
  • Choice of 1/2" Key chuck or 2MT chuck spindles
  • Choice of 4 different spindle speed arrangements
    • Slow-Speed Infinitely Variable Speeds: 330-2640 rpm
    • Hi-Speed Infinitely Variable Speeds: 500-4000 rpm
    • Slow-Speed Step-Pulley Drive: 260, 530, 1060, 1860, 3600 rpm
    • Hi-Speed Step-Pulley Drive: 400, 800, 1600, 2800, 5400 rpm
  • 3/4 hp motors (1/2 hp available on Hi-Speed Step-Pulley models only)
  • Choice of single phase or three phase motors
    		•

    Specifications:

    Drill to center of circle 15" dia.
    Capacity, hand feed 5/8" dia.
    Production rated capacity with power feed, 3/4 Hp. motor 5/8" in cast iron
    1/2" in mild steel
    Spindle travel 4 3/4"
    Spindle 2MT or 33JT
    with 1/2" chuck
    Column 3" dia. ground steel
    3/16" thick wall
    Quill ground steel, 2" dia.
    Table:
    Working surface 21-1/2" x 5-1/2"
    Spindle to table, maximum 41-1/4"
    Base:
    Working surface 13" x 10"
    Spindle to base 47-5/8"

     
     
    Standard Equipment: Dimensions & Weights:
    • 2MT or 33JT spindle
    • Micrometer depth stop
    • Push-button safety switch
    • Belt guard
    • 3-spoke feed wheel
    • Column collar
    • Width...21-1/2"
    • Depth...28" 
    • Height...72-5/8"
    • Weight...350 lbs. *
    * Approx. weight with motor

    FOR MORE INFORMATION:

    Phone:  248-442-0440
    Fax:      248-442-0807
    e-mail:superior@sudetco.com
     

    RETURN TO HOME PAGE