The Return of

CLAUSING/COLCHESTER GEARED HEAD LATHES
15", 18" and 21" Swings – 50" through 120" Centers
Overview

CLAUSING/COLCHESTER geared head lathes have earned their position as the standard of the industry, offering performance and quality at a reasonable cost. The new geared head lathes extends that reputation with new models designed to give you increased productivity into the 21st century.

Like all Clausing/Colchester lathes the new geared head lathes are guaranteed to turn within .0001". But, beyond the accuracy you expect from Clausing/Colchester, the new geared head lathes are built rugged for durability and long-lasting quality. 

SETTING THE STANDARD FOR THE INDUSTRY...

Clausing/Colchester Geared Head Lathes

 
Features
     
  • All head stock gears are ground and hardened
  • Spindle bearings, gears, and shafts are lubricated by a pumped bath of oil
  • An easy-to-read index plate makes it simple to select the proper feed or thread
  • The apron has hardened gears and oil bath lubrication
  • Extra wide bed provides accuracy and minimal wear
  • Easy access pull-out rolling chip bin
  • Precision Gamet spindle bearings
  • Backed by the Clausing Service Center, the industry leader
  • Equipped with chuck guard and lead screw cover
  • Maximum Spindle T.I.R. .0001"


 
Specifications
  15" x 50" 18" x 60" 18" x 80" 21" x 80"  21" x 120"
Swing over bed 15.7" 18.1" 18.1" 21.8" 21.8"
Swing over cross 9.7" 10.6" 10.6" 14.5" 14.5"
Center distance 50" 60" 80" 80" 120"
Bed width 12.5" 15.7" 15.7" 15.7" 15.7"
Swing in gap 23" 28.7" 28.7" 32.7" 32.7"
HEADSTOCK
Spindle nose D1-6 D1-8 D1-8 D1-11 D1-11
Spindle through hole 2.125 3 3 3.5 3.5
Spindle speed (RPM) 25 – 2000 20 – 1600 20 – 1600 18 – 1400 18 – 1400
Number of speeds 16 16 16 16 16
Spindle center 4MT 5MT 5MT 5MT 5MT
FEED AND THREADING
Longitudinal feed range .0007"-.048" .0016"-.11" .0016"-.11" .0016"-.11" .0016"-.11"
Cross feed range .00035"-.024" .0009"-.05" .0009"-.05" .0009"-.05" .0009"-.05"
Range of English threads 2-56 TPI 2-84 TPI 2-84 TPI 2-84 TPI 2-84 TPI
Number of English threads 56 73 73 73 73
Range of Metric threads .2-14 mm .2-14 mm .2-14 mm .2-14 mm .2-14 mm
Number of Metric threads 51 51 51 51 51
Leadscrew diameter 1.25" - 4 TPI 1.5" – 4 TPI 1.5" – 4 TPI 1.5" – 4 TPI 1.5" – 4 TPI
CARRIAGE
Cross slide travel 9.8" 11.8" 11.8" 11.8" 11.8"
Compound rest travel 5.1" 7.5" 7.5" 7.5" 7.5"
Power rapid traverse   Std Std Std Std
Tailstock quill diameter 2.8" 3.7" 3.7" 3.7" 3.7"
Center 5 MT 6 MT 6 MT 6 MT 6 MT
Quill travel 6.1" 5.7" 5.7" 5.7" 5.7"
Drive motor 7.5 Hp 12.5 Hp 12.5 Hp 12.5 Hp 12.5 Hp
Weight 3300 lbs. 5765 lbs. 6170 lbs. 6283 lbs. 7960 lbs.
 
Accessories
  • Power Rapid Traverse
  • Live Center
  • Taper Attachment
  • Q.C. Tool Post
  • Q.C. Rear Tool Post
  • Rear Slotted Tool Post
  • 5 Pos. Long Stop
  • 1 Pos. Stop
  • Metradial -2,4,6,8 TPI
  • Micro Carriage Stop
  • High Speed Threader
  • Follower Rest
  • Steady Rest
  • Square Tool Holder
  • Boring Bar Holder
  • Morse Taper Tool Holder
  • Cut-off Holder w/Blade
  • Drive Plate Assembly

 
 

FOR MORE INFORMATION:

Phone:  248-442-0440
Fax:      248-442-0807
e-mail:superior@sudetco.com
 
 

RETURN TO HOME PAGE